Today, unmanned vending machines have frequently appeared in people's lives, including many parks, attractions, squares, commercial pedestrian streets and other outdoor areas. A variety of unmanned vending machines have been put into use. What needs to be paid attention to? The following summary is made so that everyone can consider the following issues when launching.

　　First, the problem of the venue

　　1, the ground is firm and level

　　I believe everyone has noticed that the machine has four feet, so it has requirements on the ground. If the soft soil is likely to cause the machine to sink and tilt seriously, it may lead to accidents. Therefore, the ground needs to be firm and solid, preferably on concrete or stone ground. It is even better to add a special anti-sinking pier. The ground needs to be level. Although the four feet of the unmanned vending machine can adjust the height, once the ground irregularity exceeds the adjustment range of the feet, it will also affect normal use.

　　2, the position needs to be slightly higher

　　The machine should be placed higher than the ground, in order to prevent heavy rain and water from soaking in the machine.

　　Need to build rainproof equipment

　　机 The roof of the unmanned vending machine needs a rainproof roof, because wind and rain cannot be avoided outdoors. If the machine is directly exposed to rain, it will affect the overall service life. Many machines have touch screens and cash modules are high-precision devices. If they are wet, they will seriously affect normal work.

　　Three, good ground power

　　The unmanned vending machine is a highly precise mechanical equipment. It uses a 220V / 50HZ triangle plug power supply. It will generate static electricity and induced current during work, so it needs a good grounding wire.

　　24. Good public security environment

　　A factor that needs to be taken into consideration when putting it outdoors. If the local public security is poor and people often damage the equipment, then special consideration is needed. If it is continued to be placed, monitoring can be installed on or near the machine Camera to alert or record. Avoid severe economic losses.